TYPE: Freezer Trawler
BUILT YEAR: 1996, Peene-Werft GmbH, Germany
CLASS: DNV GL, ? 1A1 Stern trawler E0 Ice(1B) RM(-30 °C/+15 °C sea)
TONNAGE: 837 GT / 262 NT / 401 DWT
DIMENSIONS:
LOA: 40.80m
Beam: 11.00m
LPP: 34.80m
HOLD: 426 m3
FREEZING: 4 x Vertical Plate Freezers Cap; 32ts/24hrs
REFRIGERANT: Ammonia
PROCESSING: 1 x 444S Baader heading & cutting machine. Baader 33 Round-cut heading.
BUNKERS:
F.O 180m3
L.O. 4.3m3
F.W. 19.5m3
ACCOMMODATION: 19 Persons - Unpgraded 2020 to 21 Persons.

UPGRADES:
- New walk-in freezer
- New Galley stove
- Propeller blades were. Rebuilt in Jun-
- Upgraded the plotters and chart programs - Max Sea and Nobletech.
= Upgraded the Simrad. Sounder to an ES 80
- New Koden Radar,72 miles.
- New Furuno Sounder.
- New Added a Furuno Sonar.
- Added a fourth holding bin in the factory; all bins are SS and have RSW piping
- 1 x Toki Heading and gutting machine 70 fish per minute(Vacuum system for the guts attached to both machines)
- 1 x 616 Toyo Heading and gutting machine,110 fish per minute
- Includes 9-metre Tyborn doors and a set of 7-metre doors that came with the boat
- Rebuilt bottom net(western)was totally rebuilt last month
- Includes a 2-year-old mid-water net built by Swan Nets valued at USD 110,000.
- New wire last month(1000 fathom each side)
- New 120 Sabroe (stand-alone ammonia) compressor, which makes four compressors total, Freezes 130,000 pounds a day- New net drum built at Rapp Hydema
- 2 x 25 each Gilsons behind the wheelhouse

MAIN ENGINE: 2,610 BHP, MAN B&W, 900 rpm(1920 kW). Overhauled 2020
SPEED / CONSUMPTION: abt. 12 knots. Consumption/trawling MGO 6,1 ts/day. Sailing full/slow power abt. 6.1 / 4 ts/day.
PROPELLER: Nozzle-mounted propeller, 160 rpm, 3100 mm diam.
AUXILIARY ENGINE 1: 1 x TBD 616 V12, «DEUTZ AG», 562 kW.
GENERATOR 1: Shaft generator
AUXILIARY ENGINE 2: 1 x TBD 616 V12, «DEUTZ AG», 562 kW.

ACCOMMODATION: 19 Persons - Unpgraded 2020 to 21 Persons.

HOLD: 426 m3
FREEZING: 4 x Vertical Plate Freezers Cap; 32ts/24hrs
REFRIGERANT: Ammonia
PROCESSING: 1 x 444S Baader heading & cutting machine. Baader 33 Round-cut heading.

DECK EQUIPMENT:
2 x 27 ts trawl winches
2 x 9,2 ts gilson winches
Rapp Hydema AS winches
Hydraulic type winches
Max. capacity of wire on the trawl winches: 3000 m., wire diameter 26 mm.
Owners now use 2000 m., wire diameter 26 mm.
Trawl doors (as of January 2012) make “Thyboron Skibssmedie A/S”,
Denmark. Type 12. Size 115”, 3200 kg. Trawl being used (as of January 2012): Footroop 27 m. Trawl type 47/600 (headline 47/600 mesh), make Russia.
4 x 9,2 ts, 45 m/min., sweep line winches
1 x 6.5 ts, 50 m/min., cod end winch
1 x 2.7 ts, 100 m/min. out haul winch
1 x 9.2 ts, 45 m/min., bobbins winch
1 x 4.0 ts, anchor windlass “Palfinger Marine”, PKM 360, SWL 3,0 t.,12 m, deck crane
HHP anchor, 1425 kg. Chain grade NVK 2, Dia. 30 mm. Total length 49,20 m.
No net drum fitted.
Radio buoys KANNAD-406

NAVIGATION:
AIS
Radio responder SART
GMSSB FURUNO
Satellite station INMARSAT-C FELCOM-15, INMARSAT-C DEBEG 3220,
Radio navigation system NAVTEX
Gyrocompass MERIDIAN, FURUNO SC-50,
Lag DEBEG
Satellite station MINI-M
Electronic cartography
GPS GP-150
Radio location station FURUNO-2115
Echo sounder FURUNO FE-700
MARPORT.
Satellite system for TV and IP-telephone communication, new 2012 Sodena plotter, new 2012

Details of the equipment offered by TAG Marine is done in good faith but cannot be guaranteed.

Nor can we warrant the accuracy of this information nor warrant the condition of the vessel.

A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated.

All equipment is offered subject to prior sale, price change, or withdrawal without notice.

Our offers are standard valid for 30 days.